Filter
Top Products
Installing and Configuring Telephony
Manager
2-47
19. Choose the Yes button to update the PassageWay firmware now.
A dialog box appears, stating that the PassageWay firmware is about
to be downloaded.
NOTE:
You will be unable to make or receive any calls during the
download. The download process takes several minutes.
20. Hang up any calls that are on your telephone, and then choose the
OK button.
The firmware is downloaded to the PassageWay adapter or 8411
telephone. A window displays the status of the download.
If the download was successful, a message box appears, stating that
the download was successful.
If the download was unsuccessful, a dialog box appears, stating that
an error occurred during the procedure and prompting you to repeat
the download procedure. Choose the Retry button and repeat the
download procedure.
21. Choose the OK button.
Depending on your version of Windows, Connect or the Pumpware
Module verifies the PassageWay link. While the PassageWay link is
verified, the mouse arrow becomes an hourglass. When Connect or
the Pumpware Module is finished verifying the link, the hourglass
becomes an arrow again. The PassageWay link verification message
box remains on your screen. Proceed to Step 22.
22. If you are using Windows 95, click on the Connect button on the
bottom of your screen to open the Connect window, and then select
Exit from the File menu in Connect to close Connect.
If you are using Windows NT, select Exit from the File menu in the
Pumpware window to close the Pumpware Module.