Filter
Top Products
Changing the Settings for the 8411 Telephone
B-2
Select a ringing preference for an incoming call when you are busy on
another call (the default is Continuous Ringing)
2-digit code: 74 or RG
Setting: 0 - No Ring
1 - One Ring
2 - Continuous Ringing
Enable or disable the status lights (next to Button #9) for the
PassageWay interface (the default setting is Status Lights disabled)
2-digit code: 79 or PW
Setting: 1 - Enable the status lights
2 - Disable the status lights
NOTE:
By default, Button #9 is enabled for use by the PassageWay
status lamp. It is in your best interest to disable this button (using
the SHIFT MUTE code listed above). By disabling the default
setting for this button, you gain one more feature button that you
can program.
Enable or disable the status lights (next to Button #10) for the Analog
(Tip/Ring) Adjunct connected to the Analog Adjunct jack (the default
setting is Status Lights disabled)
2-digit code: 25 or AL
Setting: 1 - Enable the status lights
2 - Disable the status lights
NOTE:
By default, Button #10 is enabled for use by the analog line
status lamps. It is in your best interest to disable this button
(using the SHIFT MUTE code listed above). By disabling the
default setting for this button, you gain one more feature button
that you can program.