Lucent Technologies Comcode 108239393 Telephone User Manual


 
Installing and Configuring Telephony
Manager
2-5
5. Install and configure the new PassageWay Service Provider software
by performing the procedures in the section “Installing and
Configuring the PassageWay Service Provider” on page 2-11 in this
chapter.
To install and configure the PassageWay Service Provider, you must
perform the following procedures:
a. Read the section “Before You Begin” on page 2-12 to make sure
you have the necessary information to set up and configure the
PassageWay Service Provider.
b. Install the PassageWay Service Provider software by performing the
procedures in the section “Installing the PassageWay Service
Provider Software” on page 2-24.
6. Install Telephony Manager by performing the procedures in the
section “Installing the Telephony Manager Software” on page 2-66 in
this chapter.
7. Start Telephony Manager by performing the procedures in the section
“Starting Telephony Manager” on page 2-70 in this chapter.
8. Configure how Telephony Manager and Phonebook will operate by
performing the procedures in the section “Configuring Telephony
Manager and Phonebook Options” on page 2-78 in this chapter.