Lucent Technologies Comcode 108239393 Telephone User Manual


 
Installing and Configuring Telephony
Manager
2-6
PassageWay Telephony Manager
Components
Telephony Manager consists of the following components:
a CD-ROM
NOTE:
If you require 3-1/2” diskettes, please contact the PassageWay
Fulfillment Center at 860 434-3961 and request the diskette
version of software for Telephony Manager R2.
this guide (A PDF version of this guide is located in the Getting
Started Guide directory on the CD-ROM. Consult the Readme file in
this directory for more information.)
PassageWay Telephony Manager
Requirements
Telephony Manager requires the hardware and software listed below. Note
that system performance may be adversely affected by lower system speeds
and lower memory capacities.
an IBM PC-compatible or PS/2®-compatible PC with the following
hardware:
an 80486/66DX or higher processor
an available serial port
a minimum of 16 MB of RAM
a 3.5-inch, 1.44-MB, high-density diskette drive or CD-ROM drive
a hard disk with at least 25 MB of space available
a VGA or better monitor