Filter
Top Products
Changing the Settings for the 8411 Telephone
B-5
Programming Procedure
This section describes how to change or view the setting for your 8411
telephone.
NOTE:
You can view the settings for your telephone only if you have an 8411D
telephone.
To change or view the settings for your 8411 telephone:
NOTE:
Make sure the ringer is off, and the display (if present) is in
Normal mode. If a headset adapter is connected to the
telephone, make sure it is in the on-hook state.
1. While the telephone is on hook (that is, the handset is hung up, and
the speakerphone is off), press SHIFT.
The light next to SHIFT goes on.
2. Press MUTE.
The light next to SHIFT goes off.
3. Enter the 2-digit code for the option you want to set or view.
4. If you are changing a setting, enter the new setting.
NOTE:
If you have an 8411D telephone, you can press the * button to
scroll through each available setting. You can press the #
button to save the displayed setting and exit programming
mode.