Filter
Top Products
Installing and Configuring Telephony
Manager
2-55
b. Choose Next.
The Next label appears on the button you selected.
c. Choose the Auto Config button.
The PASTE Requirements dialog box appears, stating the
requirements for using this feature. If your system meets the
requirements, proceed to Step d. Otherwise, choose the Cancel
button and proceed to Step 3 to manually configure the
PassageWay Configurator.
d. Choose the OK button.
The Enter PASTE Feature Access Code dialog box appears. You
must enter the PASTE feature access code for your DEFINITY
system. Without this feature access code, the PassageWay
Configurator cannot download your telephone’s configuration
information from the DEFINITY system. Consult your DEFINITY
System Manager to get this feature access code.
e. Enter the PASTE feature access code, and then choose the
Continue button.
The PASTE Download dialog box appears, and the OK button is
disabled.
NOTE:
The download will take several minutes.
f. Choose the Begin button.
The configuration information is downloaded from the DEFINITY
system. If you have a PassageWay adapter installed, you may
hear some dialing occur during the download.
When the download is complete, the OK button is enabled.