Filter
Top Products
MERLIN LEGEND Communications System Release 6.1
Installation
555-661-140
Issue 1
August 1998
Installing the Control Unit
Page 2-23
Installing the Power Supply
Figure 2-6. Installing a Copper Shield in the Power Supply
!Tuck the foil shield tightly along the ledge (or crease) of the housing
and work out any air bubbles as you press the foil firmly in place.
!With the copper-foil shield in place, put the power unit information
label on the lower piece of foil.
! Attach the UL or CSA label on the power supply below the
copper-foil shield.
Upper Copper
Foil Shield
Lower Copper
Foil Shield
Power Unit
Information
Label
UL Label
or
CSA Label
CAUTION
TURN OFF
POWER BEFORE
INSERTING OR
REMOVING
MODULES