Filter
Top Products
MERLIN LEGEND Communications System Release 6.1
Installation
555-661-140
Issue 1
August 1998
Initializing and Testing the System
Page 7-17
Testing the System
!Verify that the telephones assigned to the Night Service group are
ringing.
!Have someone pick up the handset at a telephone in the Night
Service group.
Verify that you have good two-way communication.
!At both telephones, hang up.
!Repeat Steps 2 through 6 for each operator console that is
programmed to receive Night Service coverage.
!Test telephones that are programmed for Night Service with
Outward Restriction.
a. Pick up a handset on a restricted telephone and verify that outside
calls are not allowed.
b. Using the password, make an outside call.
c. Hang up the handset.
d. Press the Recall button and dial the password. (On an MLX
telephone without a programmed Recall button, press the Feature
button and dial
and the password before picking up the
handset.)
e. Pick up the handset and make an outside call.
f. Verify that you have good two-way communication and hang up.
!At the operator console, press the Night Service button again. If you
used a password in Step 1, enter the password again. Verify that the
Night Service LED turns off.
Testing the Dictation System
If dictation equipment has not been installed, skip this test. Place a call
to verify that you can access the dictation system.
To access the dictation system, follow the steps below: