Filter
Top Products
MERLIN LEGEND Communications System Release 6.1
Installation
555-661-140
Issue 1
August 1998
Prior Releases Features and Enhancements
Page xxxiv
Release 5.0 Enhancements (June, 1997)
Authorization Codes and
Remote Call Forwarding
In Release 6.0 and later Key or Hybrid/PBX mode systems, forwarding features,
including Centrex Transfer via Remote Call Forwarding, but excluding Follow
Me, can be activated or deactivated at a multiline telephone by entering the
authorization code for the extension from which calls are to be forwarded. The
user enters the authorization code, then activates or deactivates the forwarding
feature in the normal fashion. This is especially useful for a single-line
telephone user who must include a Pause character in a Centrex Transfer via
Remote Call Forwarding dialing sequence, because the character cannot be
dialed at a single-line telephone. It is also useful when activating Call
Forwarding or Remote Call Forwarding at phantom stations, or via remote
access (e.g. from another switch in the network). No other features can be used
by entering an authorization code in this fashion.
Release 5.0 Enhancements
(June, 1997)
Release 5.0 includes all Release 4.2 functionality, plus the enhancements listed
below.
Computer Telephony Integration (CTI)
Beginning with Release 5.0, a PassageWay
®
Telephony Services CTI link from
the MERLIN LEGEND Communications System to a LAN server running
Novell
®
NetWare
®
software allows Lucent Technologies-certified telephony
applications to control and monitor MLX and analog multiline telephone (BIS
only) operations. The physical connection for the CTI link is an MLX port on a
008 MLX or 408 MLX module on the MERLIN LEGEND Communications
System control unit and ISDN link interface card plugged into the customer’s
server. The feature is available for Hybrid/PBX mode systems only.
NOTE:
The NetWare server software version must be 3.12, 4.1 or 4.11.