Filter
Top Products
MERLIN LEGEND Communications System Release 6.1
Installation
555-661-140
Issue 1
August 1998
Initializing and Testing the System
Page 7-19
Testing the System
!At the destination extension, answer the incoming call.
!At the destination extension, press the Hold button.
The line button’s green LED should flash.
!Verify that music is heard at the destination extension and adjust
the volume as required.
!Hang up.
NOTE:
If the customer uses equipment that rebroadcasts music or other
copyrighted materials, the customer may be required to obtain a
copyright license from and pay license fees to a third party such as
the American Society of Composers, Artists, and Producers
(ASCAP) or Broadcast Music Incorporated (BMI). Or the customer
can purchase a Magic-on-Hold system, which does not require that
you obtain such a license, from Lucent Technologies.
Testing the Power Failure Transfer Jacks
To test a power failure transfer (PFT) jack for proper operation, you must
assign the outside line numbers to the module’s line/trunk jacks and the
trunks must be operational. A PFT telephone on a GS line must have a
GS button attached to the telephone. See Figure 7–1.