Filter
Top Products
MERLIN LEGEND Communications System Release 6.1
Installation
555-661-140
Issue 1
August 1998
Installing Applications
Page 8-25
PassageWay Direct Connect Solution
■ Lucent Technologies Set. A telephone programming application
that enables users to program telephone features for their
MLX-28D, MLX-20L, or MLX-10DP telephones from the PC.
Multiple button programming files can be created, saved, and
exchanged with other users.
■ Log Viewer. An application that enables users to access
information from the call log, which stores a record of every call
made while using Lucent Technologies Call.
■ Lucent Technologies Connect. Management software that
provides the basis for all the other PassageWay applications.
Lucent Technologies Connect also provides autodialing using the
command set used by most modems.
■ Lucent Technologies Buzz. An application that enables users to
manage incoming calls (answer, hold, or drop) and view the
calling party number (Caller ID) for each incoming call at their
telephones.
Considerations
MERLIN LEGEND Communications System Release 3.0 or later is
required for caller identification display capabilities.
Local telephone power is required if the MLX telephone is not wired with
4-pair extension wiring or if you use a MLX-20L or MLX-28D with a
Direct Station Selector (DSS).
The MLX telephone must have Idle Line Preference activated.
The Automatic Line Selection on the MLX telephone should be
programmed so that Idle Line Preference is on an ICOM button (in Key
and Behind Switch modes) or an SA button (Hybrid/PBX mode).