Filter
Top Products
MERLIN LEGEND Communications System Release 6.1
Installation
555-661-140
Issue 1
August 1998
Initializing and Testing the System
Page 7-15
Testing the System
!At the ringing telephone, have someone pick up the handset and
verify that you have good two-way communication.
!Repeat Steps 2 and 3 for each calling group.
!Make additional calls to check each member of each calling group.
!At any telephone, pick up the handset and dial the group extension
number.
!Test the calling group delay announcement (if provided) for each
group.
a. Make the group busy or have all members log out of the group (by
dialing
at each group extension).
b. Repeat Step 2.
c. After listening to the delay announcement, hang up.
d. Repeat these steps for each group.
!At the ringing telephone, have someone pick up the handset and
verify that you have good two-way communication.
System Speed Dial Test
To test System Speed Dial numbers, follow the steps below:
!Find out which numbers have been programmed for System Speed
Dial.
See the system manager or use Form 10b as a reference for System
Speed Dial numbers.
!From the test telephone, pick up the handset and dial a System
Speed Dial code.
Verify that you have good two-way communication and that the correct
party was reached.