Filter
Top Products
MERLIN LEGEND Communications System Release 6.1
Installation
555-661-140
Issue 1
August 1998
Installing the PC, CAT, or Printer
Page 5-8
Connecting a Printer to the Control Unit
■ Lucent Technologies Call Accounting Terminal (CAT) Printer
■ Lucent Technologies Call Accounting System Printer
■ Lucent Technologies Applications Printer
NOTE:
The Lucent Technologies 570 printer is not compatible with the
system.
Printer connection varies depending on the printer model, whether the
printer is grounded on the same AC outlet as the control unit, and
whether the printer is within 50 ft. (15.2 m) of the control unit. The
procedures covered in this chapter are described below:
■ If the CAT serial printer is used with a CAT and is grounded to the
same AC outlet as the control unit and is
within
50 ft. (15.2 m) of
the control unit, refer to “Connecting a CAT and Printer on the
Same AC Outlet.”
■ If the CAT serial printer is used with a CAT and is either
not
grounded to the same AC outlet as the control unit or is
more
than
50 ft. (15.2 m) from the control unit, refer to “Connecting a CAT
and Printer on a Different AC Outlet.”
■ If the SMDR or CAT printer is
within
50 ft. (15.2 m) of the control
unit and is connected to the same 117-V AC branch as the control
unit, refer to “Connecting a Printer Within 50 Feet (15.2 m).”
■ If the SMDR or CAT printer is
more
than 50 ft. (15.2 m) from the
control unit and is
not
connected to the same 117-V AC branch as
the control unit, refer to “Connecting a Printer 50 Feet (15.2 m) or
More Away.”
!
CAUTION:
Before touching leads, connectors, pins, and other
components, wear a properly grounded wrist strap, to
prevent damage from electrostatic discharge (ESD).