Filter
Top Products
MERLIN LEGEND Communications System Release 6.1
Installation
555-661-140
Issue 1
August 1998
System Numbering Forms
Page A-3
Form 2a, System Numbering: Extension Jacks
The number in the logical ID column refers to the number of the extension jack
in the control unit.
1. In the “Eqpt.” (Equipment) column, enter the type of device (such as an
MLX-20L console) that is connected to the extension jack. On the second
line, enter any attached adjuncts (such as an answering machine).
2. In the “Old Ext. No.” column, if the wire run is being changed, enter the
extension number of the old extension. If you are working with a new
installation, leave this space blank.
3. In the “Renumber to” column, enter the extension number of the
extension, if not already filled in. (This includes new installations.)
4. In the “Wire No.” column, enter the number of the wire as indicated by
the label on the wire.
5. In the “Person, Location, or Function” column, enter the name of the
person at the location, or the function of (such as a fax machine) the
extension, and any miscellaneous information particular to that
extension.