Filter
Top Products
Mitel NuPoint Messenger Technical Documentation - Release 7.0
Trunks Busy,” or ATB. The server administrator must specify the line group(s), the start and stop
times, and the start and stop days for the report. The report can be presented in one of two
methods. The Standard Group Usage displays the All Trunks Busy data for each line group in
15-minute increments, for each hour of the chosen interval. The Group Usage Summary Report
shows a single value for each line group. Figure 12-2 shows a Sample Standard Group Usage
Report.
Figure 12-2 Sample Standard Group Usage Report
LINE GROUP ATB 15min REPORT
Thu Apr 20, 1995 5:58 pm
04/17/95 8hr-17hr --- minutes interval ---
Port Group 1 [ESMDI]
DAY=01 HOUR=08 00-14 15-29 30-44 45-59 TOTAL BUSY
ATB_SEC 218 77 81 249 625 17 %
ATB_CNT 10 1 8 13 32
DAY=01 HOUR=09 00-14 15-29 30-44 45-59 TOTAL BUSY
ATB_SEC 35 163 0 0 198 6 %
ATB_CNT 6 10 0 0 16
DAY=01 HOUR=10 00-14 15-29 30-44 45-59 TOTAL BUSY
ATB_SEC 44 13 0 0 57 2 %
ATB_CNT 4 2 0 0 6
DAY=01 HOUR=11 00-14 15-29 30-44 45-59 TOTAL BUSY
ATB_SEC 5 0 14 0 19 1 %
ATB_CNT 1 0 3 0 4
HIGHEST ATB_SEC: 625 sec at 8 hr
LOWEST ATB_SEC: 0 sec at 12,13,14,15,16 hr
Reading the Standard Group Usage Report
The report heading shows the date and time that the report was run.
The first line of the report shows the date of the first statistic in the report and time interval during
which the data was gathered.
Port Group
The data displayed immediately below this entry refers to line group 1.
©
Copyright 2002, Mitel Networks Corporation 159