Filter
Top Products
1–14 User’s Guide
Getting to Know Your HP iPAQ Mobile Messenger
Protecting the Screen
Ä
CAUTION: The screen and camera lens of your HP iPAQ is made of
glass and can be damaged or broken by drops, impacts, or pressure.
Note: HP is not responsible for damage that occurs as a result of
your failure to follow the instructions that came with the HP
branded product. Refer to the warranty document included with
your HP iPAQ for more information.
You should observe the following practices to protect the screen
and camera lens of your HP iPAQ from damage.
■ When transporting your HP iPAQ in a purse, pocket,
briefcase, etc., ensure the device does not get compressed,
bent, dropped, hit, or sat on.
■ Do not place anything on top of your HP iPAQ to prevent
damage to the screen.
■ Clean your HP iPAQ by wiping the screen, the camera lens,
and the exterior with a soft, damp cloth lightly moistened
only with water.
■ Avoid exposing your HP iPAQ to direct sunlight or strong
ultraviolet light for extended periods of time.
■ Avoid scratching the surface of the screen and the camera
lens and banging them against hard objects.
■ Use only the stylus that comes with your HP iPAQ or an
approved replacement on the screen to prevent scratching it.
If you lose or break your stylus, you can order extras at
www.hp.com/go/ipaqaccessories.
Ä
CAUTION: To reduce the risk of damage to the internal components,
do not spray liquid directly on the screen, or allow excess liquid to drip
inside your HP iPAQ. Using soap or other cleaning products on the
screen may discolor the finish and damage it.
HP
Confidential