Filter
Top Products
Using Bluetooth
User’s Guide 9–7
Revised: 12/16/04
Automatically Enabling Services
To automatically enable services:
1. From the Today screen, tap the iPAQ Wireless icon in the
Command bar.
2. Tap Bluetooth > Settings > Services tab.
3. In the Services box, select the service you want to enable:
File Transfer, Information Exchange, Serial Port,
Personal Network Server, Hands free, or Dial-up
Networking Server.
4. The Service you select automatically enables the Service
settings. Tap on the appropriate checkbox to change these
Service settings to your preference.
5. Tap OK to return to the iPAQ Wireless screen.
Note: If you select Authorization required in the Service
Settings, you must authorize each connection. Your HP iPAQ
will then always ask you if the connection should be permitted.
Secure Connections using a Passkey or Bond
To establish a secure connection with another device, you can use
the passkey feature or an established bond. You can also add data
encryption to this type of security.
HP
Confidential