Filter
Top Products
13–4 User’s Guide
Managing the Battery
4. Replace the back cover by aligning the two tabs on the top of
the cover 1 with the two latches in the cover compartment
and sliding the back cover on until it clicks into place 2.
Note: If the battery is fully discharged, you must connect the
AC Adapter to the HP iPAQ to fully charge it before continuing.
It takes up to four hours to fully charge a completely drained
battery.
Removing the Battery
Ä
CAUTION: Before removing the battery, use iPAQ Backup or
ActiveSync to back up data on your HP iPAQ. If you need to clear the
memory during the removal process, you will be able to restore the
data. To prevent losing information, you can also copy user-installed
applications to the iPAQ File Store folder.
To remove the battery from the HP iPAQ hw6500 Series:
1. Repeat the above procedure for removing the battery cover.
2. Remove the battery from the compartment by lifting the tab.
HP
Confidential