Filter
Top Products
15–1 User’s Guide
15
Troubleshooting
Self-Test Diagnostics
Use the Self-Test application to run tests on the operation of your
device. The diagnostics application tests for sound, notification,
GSM/GPRS, and buttons.
To run the Self-Test application:
1. From the Start menu, tap Settings > System tab > Self-Test.
2. Place a check in the checkbox next to the items to be tested or
in all checkboxes to test all of them.
3. Tap Start.
4. Follow the screen instructions as tests are performed on each
requested item. Tap OK or Cancel as required as you
proceed through the testing. If you cancel a test, the test
status is set to FAIL.
Note: You will receive Error messages with specific information
on items that fail. For instance, if you checked sound and it is not
working properly, you could get an Error message that says
something like the following: “Error detecting sound.” Use the
information in the Error messages to correct the device item.
HP
Confidential