Filter
Top Products
Chapter 3 ( SRS-2100 Local Features
Page 3-39
If the button is deactivated as
MIC-OFF, it can be used as a one-
touch button.
MIC-OFF is active by default
when your SRS-2100 is delivered.
If you deactivate MIC-OFF,
assign its button as a one-touch
button, and then try to reactivate
MIC-OFF, the button's LED turns
red as a warning. You must quit
the procedure (press * to return
to the Service Mode main menus)
and cancel the one-touch number
on the button before you can
reactivate MIC-OFF. If you try to
reactivate MIC-OFF without
doing this, the message INVALID
SELECTION appears and your
attempt fails.
If you are deactivating the MIC-
OFF button, make sure the
function is turned off (the LED is
unlit) before beginning the
procedure.
To activate or deactivate MIC-
OFF, follow these steps:
1. Press Service, then REGISTER
(softkey 4), 12, ENTER (softkey
1). A screen appears showing
you the current status of MIC-
OFF:
MIC MUTE MODE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
NON SUPPORTED
ENTER NEXT CLEAR
REGISTER