Filter
Top Products
SRS-2100 Data Operation ( Chapter 4
Page 4-2
1. Press DATA (softkey 2).
Next to the word DATA on the
display, a blinking terminal
symbol appears, and to its left the
word SEND appears for about six
seconds.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
12:55 PM SUNDAY MAY 14
SEND DATA CLEAR DIR-LIST
2. Use the keypad to enter the
number you wish to dial (or
press a one-touch button), and
press SEND (softkey 1).
Note: The SEND key tells the
Digital Set to dial the number. If
you don't press SEND, the
Digital Set will dial the number
after a six second delay.
As you dial, the number you are
dialing appears on the display.
When you press SEND, the
display returns to its normal state,
with the terminal symbol to the
left of DATA.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
12:55 PM SUNDAY MAY 14
UNA-LIST DATA CLEAR DIR-
LIST
If the terminal symbol continues
to blink for more than a minute,
the remote Data Terminal isn't
answering the call. Press DATA
again to clear the call.