Filter
Top Products
Chapter 3 ( SRS-2100 Local Features
Page 3-21
You now can operate the SRS-
2100 using only your headset.
The SPEAKER button controls
picking up and hanging up calls,
and the MIC-OFF button is not
operational. The sounds that are
usually audible through the
speaker, such as the key tones,
are now audible only through the
headset.
Switching from Headset Back
to Handset Mode
Do steps 1 through 4 in the
previous section, but in step 3,
press 1 instead of 2. The final
screen will look like this instead:
HAND-SET/HEAD-SET SERVICE MODE
CURRENT MODE IS HAND-SET
COMPLETED
ENTER NEXT CLEAR
REGISTER
The MIC-OFF button (if active)
controls the microphone in the
handset so that you can have
private conversations with others
in the room and the connected
party cannot hear. Depress the
MIC-OFF button to resume the
telephone conversation.
When the display shows the
selection you prefer, press
REGISTER (softkey 4) to return to
the normal display.
Selecting Handsfree Operation
(using the speaker and
microphone)
To select handsfree operation
while in handset mode, follow
these steps:
1. Press REGISTER (softkey 4), 5,
ENTER (softkey 1). This screen
appears:
HANDS-FREE SERVICE MODE
NON SUPPORTED
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
2. Press ENTER, and this screen
appears:
SELECT ITEM (1-2)
1: SUPPORT MODE 2: NO SUPPORT
MODE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
3. Press 1. Line 2 changes to
(SELECT=1).
4. Press ENTER. This screen
appears: