Filter
Top Products
SRS-2100 Local Features ( Chapter 3
Page 3-30
MESSAGE LOGGING - SELECT ITEM (1-
3)
1: LOGGING-START 2: LOGGING-STOP
3: HISTORY MODE
ENTER NEXT CLEAR
REGISTER
2. To select the History mode,
press 3, ENTER (softkey 1).
The messages appear on a screen
like this:
1T>N: SETUP CR=18
1N>T: CALL-PROC CR=98
1N>T: PROGRESS CR=98
HEX ROLL-UP ROLL-DOWN EXIT
The history file holds up to 24
messages. Scroll through
messages by pressing ROLL-UP
(softkey 2) or ROLL-DOWN
(softkey 3).
3. To display the full message text
in hexadecimal:
• Press ROLL-UP or ROLL-
DOWN to select a message.
• Press HEX.
The message appears on a screen
like this:
08 01 CR: 01 SETUP: 05
KP: 2C 07 35
AI: 39 31 39
NORMAL ROLL-UP ROLL-DOWN EXIT
The hexadecimal message may
take up more than one screen.
Scroll through the rest of the
message by pressing ROLL-UP or
ROLL-DOWN. To return to a
normal display (non-hexadecimal),
press NORMAL.
4. To quit the History mode, press
EXIT.
The menu of message logging
options appears again.
To stop message logging and
save all messages in the history
file before returning to normal
operations, press 2, then press
ENTER. The screen displays the
message MESSAGE LOGGING
STOP.
5. To return to normal operations,
press REGISTER (softkey 4).
The standard display screen
reappears.