Fujitsu SRS-2100 Telephone User Manual


 
Appendix B ( SRS-2100 Installation
Page B-19
Selection 7: Originating DN
The SRS-2100 supports new ISDN
features that allow you to
designate lines for originating or
receiving calls. This feature
works with a complementary
switch feature that you can order
from your telephone company. It
is called Call Appearance
Reservation. For these features
to work properly, both the SRS-
2100 and the switch must be
properly configured.
The categories, described as “call
appearance reservation status”
that you may select are listed
below.
Originating only: allows certain
Directory numbers or call
appearances of Directory
Numbers to be used for
outgoing calls only.
Terminating only: allows certain
Directory numbers or call
appearances of Directory
Numbers to be used for
incoming calls only.
Originating only/Priority
Incoming only: allows certain
Directory numbers or call
appearances of Directory
Numbers to be used for
outgoing calls and for
incoming priority calls only.
Non-reserved: may be assigned
to lines that have no
reservation status.
The first step is to designate the
CA or Directory Number that you
will typically use for outgoing
calls. This is called the
Originating DN. If you do not
subscribe to Call Appearance
Reservation, you do not need to
follow the steps in Selection 7 or
Selection 8.
1. To manually assign the
Originating Directory Number
key for your SRS-2100, press 7,
ENTER to view the following
display:
ORIGINATING DN REGISTRATION
SELECT ASSIGN KEY
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
ENTER NEXT CLEAR
REGISTER
2. Press the selected Multi-assign
key.
ORIGINATING DN REGISTRATION (1)
ORIGINATING DN = ON
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
ENTER NEXT CLEAR
REGISTER
3. Press ENTER. The following
display is shown. You have the
option to turn the selected key
ON or OFF.
ORIGINATING DN SELECT ITEM (1-2)
1:ON 2:OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .