Filter
Top Products
Appendix B ( SRS-2100 Installation
Page B-1
APPENDIX B
INSTALLATION
This appendix is intended mainly
for System Administrators or
service personnel with
responsibility for installing the
SRS-2100. End users can also
install the digital set if provided
with the necessary hardware and
information from their System
Administrator.
Installation of the SRS-2100
involves four main steps:
• Connecting the set to the
network
It’s necessary to determine
the type of Telephone
Company switching
equipment in use for proper
connection to the Telephone
Company network.
Implementation procedures
vary from one manufacturer
to another.
Switch Manufacturer
DMS-100 Nortel
5ESS Lucent
EWSD Siemens
• Entering Service Profile
Identifiers (SPIDs) and a D-
channel Terminal Endpoint
Identifier (TEI) for packet-
switched data calls, as
required
• Loading network data. This
may be accomplished by two
methods: 1) downloading of
features from the switch, or 2)
manual configuration of
multifunction buttons.
• Programming and labeling the
set
UNA-LIST DATA CLEAR DIR-LIST
1 2 3 4
5:20 PM Tuesday January 4
Service
Standard Softkey Layout
(The DATA softkey label appears
only if you have a voice/data
terminal.)
Note: Softkey 1 also serves as
the ENTER key (for entering
information as indicated in this
User's Guide).