Filter
Top Products
Chapter 3 ( SRS-2100 Local Features
Page 3-27
1. Press SERVICE, then REGISTER
(softkey 4), 7, ENTER (softkey
1). This screen appears:
RINGER SERVICE - SELECT ITEM (1-4)
1: RINGER VOLUME 2: RINGER TONE
3: RINGING 4: RINGER
PATTERN
ENTER NEXT CLEAR
REGISTER
2. Press 3, ENTER (softkey 1) again
and this screen appears:
RINGING MODE
CURRENT MODE IS BELL
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
ENTER NEXT CLEAR
REGISTER
3. Press ENTER again and this
menu appears:
SELECT ITEM (1-2)
1: BELL 2: SILENT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
4. Select 1 for a normal ring or 2 for
a silent ring and then press
ENTER. The screen shows your
selection plus the word
COMPLETED:
RINGING MODE
CURRENT MODE IS BELL
COMPLETED
ENTER NEXT CLEAR
REGISTER
5. To return to the normal display,
press REGISTER (softkey 4).
To change another setting, you
can press asterisk (*) to return to
the Service Mode options.
Selecting Ringer Pattern
This selection determines the
type of ring that announces an
incoming call when you are
conversing on another line.
1. Press SERVICE, then REGISTER
(softkey 4), 7, ENTER (softkey
1). This screen appears:
RINGER SERVICE MODE - SELECT ITEM
(1-4)
1: RINGER VOLUME 2: RINGER TONE
3: RINGING 4: RINGER
PATTERN
ENTER NEXT CLEAR
REGISTER
2. Press 4, ENTER. A screen
appears showing you the
current ringer pattern setting:
RINGER PATTERN MODE
CURRENT MODE IS MUTE RING
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER