Filter
Top Products
SRS-2100 Voice Features ( Chapter 2
Page 2-6
or
c. Press DROP. (5ESS
2. Dial the desired number by
pressing the buttons on the
numeric keypad.
3. If your call is not answered, you
can:
a. Hang up by pressing the
SPEAKER button.
or
b. Retrieve the original call, if it
was held, by pressing its red-
flashing Call Appearance
button.
4. If your call is answered,
converse with the called party.
(If the MIC-OFF LED is red, the
microphone has been turned off.
Press MIC-OFF to turn it back
on.)
You can turn off the microphone
by pressing the MIC-OFF
button; its LED will turn red. No
sound will then be transmitted
to the called party, allowing you
to have a private conversation
with others in the room. To turn
the microphone back on, press
MIC-OFF again; its red LED will
go dark.
5. When the conversation is over,
hang up by pressing the
SPEAKER button. Note the
displayed call duration; it
vanishes after about three
seconds.
or
Press DROP. (5ESS
You may then pick up the call
you were originally talking on, if
it was held, by pressing its red-
flashing Call Appearance button
and then SPEAKER.
Note: Onhook dialing. In place
of steps 1 and 2, you can dial
the number first and then press
SPEAKER. The phone
automatically dials the number.
The number you enter remains
available for dialing for about
three minutes.
You can also use a one-touch
button, after handling the
existing call. This automatically
selects handsfree operation on
an idle CA and dials the number.
Skip step 2.
(See also "Handsfree, Handset,
and Headset Modes", in Chapter
3, "Local Features".)