Filter
Top Products
SRS-2100 Overview ( Chapter 1
Page 1-6
For Features
If the button is assigned to a
local or network feature, the
indicator lights when certain
features are activated.
For Calls
If the button is assigned to a
Directory Number or a Call
Appearance on your phone,
the indicator slowly flashes
green for incoming calls,
flashes red if a call is on hold
at your phone, and is steady
red when a call is active on
your phone.
MULTIFUNCTION BUTTONS
The 32 multifunction buttons on
your SRS-2100 are in three rows
of 10 buttons each along the top
of the front panel (excluding the
button assigned to MIC-OFF),
plus the three unassigned
function buttons to the right of
the numeric keypad. (The
recommended feature
assignments for these function
buttons are CONFERENCE,
DROP, and TRANSFER.) Figure
1-3 shows the numbering of the
multifunction buttons. (The
numbers in the figure are
illustrative only. They do not
appear on the phone.)
21 22 28 29 MIC-OFF
11
1 2
12 18 19 20
8 9 10
..........
..........
..........
31
32 Redial
30
Speaker Hold
Figure 1-3 Multifunction
Button Layout
Mulifunction buttons have three
uses:
One-touch
Dial a number you stored there.
Network feature
Activate/deactivate a special
network feature, such as call
forwarding.
Directory Number (DN) or
Call Appearance (CA)
Handle incoming and outgoing
calls.
Using one-touch dialing buttons
is described in Chapter 2. Chapter
3 shows how to set-up the
buttons.
Special features, such as call
forwarding, are provided by the
ISDN network. These features are
selected by your System
Administrator and assigned to
buttons on your phone during
installation. Your System
Administrator will provide details.