Filter
Top Products
SRS-2100 Local Features ( Chapter 3
Page 3-24
Setting Ringer Volume
To set the ringer volume, follow
these steps:
1. Press SERVICE, then REGISTER
(softkey 4), 7, ENTER (softkey
1). This screen appears:
RINGER SERVICE - SELECT ITEM (1-4)
1: RINGER VOLUME 2: RINGER TONE
3: RINGING 4: RINGER
PATTERN
ENTER NEXT CLEAR
REGISTER
2. Press 1, ENTER. A screen
appears showing you the
current volume setting:
RINGER VOLUME MODE
CURRENT MODE IS MEDIUM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
ENTER NEXT CLEAR
REGISTER
3. Press ENTER again and this
menu appears:
SELECT ITEM (1-3)
1: SOFT 2: MEDIUM
3: HIGH
ENTER NEXT CLEAR
REGISTER
4. Press the number for the desired
volume.
The phone rings once at the
selected volume. If the volume is
too loud or too soft, try a different
option.
5. When you hear a volume you
like, press ENTER.
The screen shows your selection
plus the word COMPLETED:
RINGER VOLUME MODE
CURRENT MODE IS SOFT
COMPLETED
ENTER NEXT CLEAR
REGISTER
6. To return to the normal display,
press REGISTER (softkey 4).
To change another setting, you
can press asterisk (*) to return to
the Service Mode options.
Setting Ringer Tone
To set the ringer tone, follow
these steps:
1. Press SERVICE, then REGISTER
(softkey 4), 7, ENTER (softkey
1). This screen appears:
RINGER SERVICE - SELECT ITEM (1-4)
1: RINGER VOLUME 2: RINGER TONE
3: RINGING 4: RINGER
PATTERN
ENTER NEXT CLEAR
REGISTER