Filter
Top Products
SRS-2100 Voice Features ( Chapter 2
Page 2-4
Receiving Handset Calls
An incoming call makes the
phone ring and the Call
Appearance's LED flash green.
If you are not talking on
another call
1. Pick up the handset. (Press the
ringing CA if necessary.) The
LED changes to steady red.
2. Converse with the calling party.
3. When your conversation ends,
hang up by replacing the
handset in its cradle. Note the
displayed call duration; it
vanishes after about three
seconds.
If you are already talking on
another call
1. Handle the active call in one of
the following ways:
a. End the call by pressing the
button in the handset cradle.
Then press the green-flashing
Call Appearance button to
answer the incoming call.
or
b. Retain the call by pressing the
green-flashing Call
Appearance button to answer
the incoming call. (The first
call is automatically put on
hold.)
2. Converse with the calling party.
3. When your conversation ends,
you have the following choices:
• Hang up by replacing the
handset in its cradle. Note the
displayed call duration; it
vanishes after about three
seconds.
or
• If you put your original call on
hold, pick up the call by
pressing its red-flashing Call
Appearance button.
or
• Press DROP. (5ESS
Note: You can turn off the
microphone in the handset by
pressing the MIC-OFF button;
its LED turns red. Sound will
not be transmitted to the called
party, allowing you to hold a
private conversation with others
in the room. To turn the
microphone back on, press
MIC-OFF again; the red LED is
turned off.
Placing Handsfree Calls
A handsfree call uses the
integrated microphone and
speaker instead of the handset.