Filter
Top Products
Appendix B ( SRS-2100 Installation
Page B-17
From this point, you may assign
Intercom and Group Intercom
keys using the same process used
for Call Appearances.
Selection 5: Conference
It is necessary to assign the
conference feature to a key using
the following process.
Note: This step is not necessary
if CONFERENCE is assigned to
Button 30, using Feature
Activator 30 or 60.
1. Assign CONFERENCE as you
would any feature activator.
2. In the KEY ATTR MODE, press
5, CONFERENCE, then press
ENTER:
CONF APPEARANCE
SELECT ASSIGN KEY
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
3. Press selected CONFERENCE
button. This screen appears:
CONFKEY = (XX) FA =
(XX)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
4. Press ENTER. The selected
button's LED turns green.
CONFKEY = 30 FA =
30
COMPLETED
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
Selection 6: Transfer Key
Note: This step is not necessary
if TRANSFER is assigned to
Button 32, using Feature
Activator 32 or 61.
1. To manually assign the Transfer
key for your SRS-2100, press 6,
ENTER to view the following
display: