Filter
Top Products
Appendix B ( SRS-2100 Installation
Page B-23
ENTER NEXT CLEAR
REGISTER
PROGRAMMING AND
LABELING THE SET
Refer to Chapter 3 for procedures
to:
• Enable headset use and turn off
handsfree mode, if desired.
• Set operating parameters such
as ringer volume and tone.
• Program the calendar/clock and
other local features.
To label the buttons on the set,
you must first remove the plastic
cover over the front panel. Lift
the plastic cover from the right
side (the side opposite the
handset).
Below the cover is a template.
Write button labels on this
template to show the directory
numbers or features assigned to
each button. Then lay the
template back on the front panel.
To reinsert the cover, fit the tabs
into the slots at the left side of the
panel and work the cover down
over the buttons.
Fujitsu has developed a
DOS/Windows and a Macintosh
application file using Microsoft
EXCEL 4.0 and Excel 5.0 to assist
you in printing the templates.
These files are available for no
charge via our World Wide Web
site at http://www.fnc.fujitsu.com.