Filter
Top Products
Appendix B ( SRS-2100 Installation
Page B-13
If you canceled the CA number,
no numbers appear after CA= and
the button indicator goes dark.
4. With your Call Appearance
assignment complete, you have
these choices:
• To assign another CA, press
the desired button and repeat
steps 2 and 3.
• To return to normal operation,
press REGISTER.
• To make additional button
assignments, press asterisk
(*). This returns you to the
menu mode main menu.
This completes programming of
CAs. If you have programmed
your SPID, correctly completed
this procedure and your ISDN line
is properly plugged in you should
now be ready to place and receive
voice calls. If you encounter
problems, review these items for
accuracy.
Selection 2: Feature
Activator
1. Press 2 and ENTER. This screen
appears:
FEATURE ACTIVATOR MODE
SELECT ASSIGN KEY
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
The set's indicators show button
status as follows:
• Green indicates a button
already assigned to a network
feature.
• Red indicates a button already
assigned to a DN, CA or to
Intercom or Intercom Group,
or to a local feature such as
one-touch.
• Unlit indicates an unassigned
button.
2. Press the button to which you
want to assign the network
feature.
You can press any unlit or green
multifunction button. If you
press a red button, the display
shows the message INVALID
SELECTION, and the set waits for
you to press a valid button.
• If you press a green button,
the display shows the current
feature number assigned to
that multifunction button.
You can either enter a new
feature number to replace the
current number or cancel the
current number.
• If you select an unlit button,
the screen looks like this:
FEATURE ACTIVATOR MODE