Filter
Top Products
SRS-2100 Local Features ( Chapter 3
Page 3-20
Calls are connected and
disconnected only by your
pressing the SPEAKER button.
In headset mode, the handsfree
mode, including the
speaker/microphone, is not
supported.
Handset Mode
Enables normal use as a handset
phone. While in this mode, the
speaker can be enabled or
disabled as follows:
Handsfree Supported - allows
speaker use, controlled by
SPEAKER button.
Handsfree Non Supported -
disallows speaker use. The
SPEAKER button is disabled.
Picking up a call and hanging up
on calls is by handset only.
Notes:
• Some of the data entry displays
have built-in timers. If you do
not enter information within
fifteen seconds, the display
reverts to the menu for selecting
the feature you were setting up.
You must reselect the feature
and start again.
• If for any reason you become
confused, you can always press
REGISTER (softkey 4) to return
to the menus and start over.
Operating the Set with a
Headset
To operate the set with a headset,
follow these steps:
1. Press REGISTER (softkey 4), 6,
ENTER (softkey 1). This screen
appears:
HAND-SET/HEAD-SET SERVICE MODE
CURRENT MODE IS HAND-SET
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
2. Press ENTER, and this screen
appears:
SELECT ITEM (1-2)
1: HAND-SET MODE 2: HEAD-SET MODE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
3. Press 2. Line 2 changes to
(SELECT=2).
4. Press ENTER. This screen
appears:
HAND-SET/HEAD-SET SERVICE MODE
CURRENT MODE IS HEAD-SET
COMPLETED
ENTER NEXT CLEAR
REGISTER