Filter
Top Products
Chapter 3 ( SRS-2100 Local Features
Page 3-1
CHAPTER 3
LOCAL FEATURES
This chapter explains how to use
the display and softkeys to set
the features controlled by the
SRS-2100. The first section
describes the Service Mode, from
which you make all changes to
local features. Subsequent
sections describe how to set each
feature, in the following order:
• Setting ringer volume, tone, and
operating modes
• Programming one-touch buttons
• Setting the calendar/clock
• Reinitializing the phone
• Enabling unanswered call
logging (UNA-LIST)
• Selecting handsfree (speaker),
handset, or headset operation
• Using Call Announce Intercom
• Using Q.931 message logging
• Activating or deactivating the
MIC-OFF button
• Choosing an option for how the
SRS-2100 selects a Call
Appearance button when you
go offhook
• Setting-up the Personal
Directory
A final section gives an example
of how to correct mistakes while
setting local options in Service
Mode.
Note: Options 8 (SPID) and 10
(KEY-ATTR) in Service Mode
are installation functions
usually performed by your
System Administrator or phone
maintenance personnel. (See
Appendix B.)
UNA-LIST DATA CLEAR DIR-LIST
1 2 3 4
5:20 PM Tuesday January 4
Service
Standard Softkey Layout
(The DATA softkey label appears
only if you have a voice/data
terminal.)
Note: Softkey 1 also serves as
the ENTER key (for entering
information as indicated in this
User's Guide).
SERVICE MODE OPERATIONS
The SRS-2100 has a 13-item menu
from which you select options to
change SRS-2100 local features.
Note: Anytime you are in the
normal display mode and wish
to enter service mode, you must
first press the SERVICE key.
This will change softkey 4 to the
REGISTER function. Pressing
REGISTER at this time selects
the menu for the service mode.