Filter
Top Products
SRS-2100 Local Features ( Chapter 3
Page 3-14
PRIVATE DATA CLEAR
COMPLETED
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
3. To return to normal operation,
press REGISTER (softkey 4).
UNANSWERED CALL
LOGGING (UNA-LIST)
Once enabled, this feature
records information about
incoming calls that were not
answered at this phone.
For each unanswered call (up to
eight), the set records the date
and time of the call plus the
telephone number of the calling
party. The ninth and later
unanswered calls replace the first,
second, and so forth, in order, so
your UNA-LIST always has the
most recent eight. (If the caller
gets a busy signal, the call is not
considered "unanswered".) If the
set receives a call from a number
already on the UNA-LIST, the
latest call is recorded and the
earlier call is dropped from the list.
The set can be configured to
record unanswered calls for all
lines, designated lines, or no lines
(Not Activated).
Some of the data entry displays
have built-in timers. If you do not
enter information within fifteen
seconds, the display reverts to
the menu for selecting the feature
you were setting up. You must
reselect the feature and start
again.
If for any reason you become
confused, you can always press
REGISTER (softkey 4) to return to
the menus and start over.
Enabling the UNA-LIST
Feature
To enable unanswered call
logging and select the type of
UNA-LIST to be used, follow
these steps:
1. Press Service, then REGISTER
(softkey 4), 4, ENTER (softkey
1).
If the following screen appears,
the UNA-LIST feature is disabled:
UNA-LIST SERVICE MODE
NON SUPPORTED
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
To leave it as is, press REGISTER
again.