Filter
Top Products
Chapter 3 ( SRS-2100 Local Features
Page 3-35
Specifying the Directory
Numbers of Call Screeners
At the conclusion of selecting
buttons for Call Announce
Intercom, this screen appears:
INTERCOM FEATURE
SUPPORTED (SELECT/ALL)
COMPLETED
ENTER NEXT CLEAR
REGISTER
1. Press ENTER. If one or two way
intercom is enabled, the screen
displays the enabled mode plus
the authorized Directory
Number, as shown below:
INTERCOM FEATURE (1)
TWO WAY INTERCOM SUPPORTED
985*3112
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
If no telephone numbers have
been programmed in, the Call
Announce Intercom feature is
disabled, and the screen displays
NON SUPPORTED:
INTERCOM FEATURE (1)
NONSUPPORTED
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
To program the first number and
enable Call Announce Intercom,
go to step 2.
2. Press ENTER. The Call
Announce Intercom selection
screen appears:
INTERCOM FEATURE - SELECT ITEM (1-
3)
1:ONE WAY INTERCOM 2:TWO WAY
INTERCOM
3: TURN OFF INTERCOM FEATURE
ENTER NEXT CLEAR
REGISTER
3. To enable the intercom feature,
dial 1 or 2 and press ENTER. A
screen appears showing your
choice and prompting for an
authorized Directory Number:
TWO WAY SELECTED (1)
ENTER AUTHORIZED TELEPHONE
NUMBER
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR
REGISTER
To disable the intercom feature,
dial 3 and press ENTER. When
the screen displays the message
INTERCOM TURNED OFF, press
REGISTER (softkey 4) to return to
normal operation.