Filter
Top Products
4-13
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Chapter 4 Using the Cisco 7920 Configuration Utility
Overview of the Application Windows
Note The default user password can be used to unlock a phone if the user has not
changed the keylock password.
Administrators are highly encouraged to change the Admin password when
bringing up the system for the first time.
Changing the Administrator Password
You need to log in with administrator privileges before you can change the
administrator password. Follow these steps to change the administrator password:
Procedure
Step 1 Choose Edit > Change Admin Password to bring up the Change Admin
Password window.
Step 2 In the New Password field, enter the new password.
Step 3 In the Verify New Password field, enter the new password.
Step 4 Click OK.
Logging Out
Logging out disconnects the Cisco Wireless IP Phone 7920 from the PC. You will
not be able to import settings from the phone, to export configuration files, or to
upload the firmware image to the phone.
When you disconnect the USB cable, you are logged out automatically. If you
switch to another phone in the On-Line mode, you are logged out of the
configuration Utility automatically. To log out, follow these steps.
Table 4-3 Default Username and Passwords
Username Password Authentication
Admin
cisco By Configuration Utility
User
12345 By Cisco Wireless IP Phone 7920