Filter
Top Products
5-13
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Chapter 5 Configuring Network Settings on the Cisco Wireless IP Phone 7920
Verifying or Entering Network Settings
Step 3 Scroll to Static Settings and press Select.
The Static Settings menu options display.
Step 4 Scroll to Primary DNS Server, then press Select.
Step 5 Press the Edit softkey.
Step 6 Enter or modify the IP address.
For information about entering values, see the “Guidelines for Editing Settings in
the Network Configuration Menu” section on page 5-3.
Step 7 Scroll to Secondary DNS Server, then press Select.
Step 8 Press the Edit softkey.
Step 9 Enter or modify the IP address.
Step 10 Press Back to return to the Static Settings options.
Related Topics
• Displaying the Network Configuration Menu, page 5-2
• Guidelines for Editing Settings in the Network Configuration Menu, page 5-3
• Viewing the Current Configuration, page 5-6
• Configuring TFTP Options, page 5-13
• Viewing the Media Access Control (MAC) Address, page 5-14
Configuring TFTP Options
If you use DHCP to direct the Cisco IP Phones to a TFTP server, you can also
assign an alternative TFTP server to some phones instead of the one assigned by
DHCP. To assign a TFTP server to a phone, use the following steps.
Procedure
Step 1 Press the Menu softkey.
Step 2 Choose Network Config > TFTP Option
Step 3 To use DHCP to assign a TFTP server IP address, scroll to Use DHCP or