Filter
Top Products
6-9
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Chapter 6 Configuring the Wireless Network Settings on the Cisco Wireless IP Phone 7920
Entering or Verifying Wireless Settings
Step 5 Scroll to WEP Key Settings and press Select .
Step 6 Choose one of these options:
• None—Disables the WEP key function and a check mark appears.
• 40 Bits—Enter a 10-digit password
• 128 Bits—Enter a 26-digit password
Step 7 When you have completed the entry, press Back.
A check mark appears next to the selected option.
Related Topics
• Activating the Wireless Settings
• Setting Up the Service Set Identifier (SSID)
• Selecting the Authentication Type
Activating the Wireless Settings
After you have added entries or made changes to entries in the Wireless Settings
menu, you must activate them. Use the following steps to activate the settings.
Procedure
Step 1 Press the Menu softkey.
Step 2 Choose Network Config > 802.11b Configuration > Wireless Settings
Step 3 Scroll to Activate and press Select.
The Service Set Identifier (SSID), authentication type, or Wired Equivalent
Privacy (WEP) keys are activated.