Filter
Top Products
3-3
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Chapter 3 Setting Up the Cisco Wireless IP Phone 7920
Before You Begin
Table 3-1 explains and provides references for many of the configuration
activities for which you use Cisco CallManager Administration.
Related Topics
• Network Requirements, page 3-2
• Wireless Network and Access Point Configuration, page 3-3
• Safety and Performance Information, page 3-5
Wireless Network and Access Point Configuration
This section identifies key access point (AP) configuration options that are
required for optimal voice performance. This is not a complete list of
configuration steps or options for installing a Cisco Aironet Access Point. For
more information about configuring your AP, refer to the appropriate
Cisco Aironet Access Point Installation and Configuration Guide for your model.
Table 3-1 Cisco CallManager Configuration Tasks
Activity Explanation Reference
Auto-registration. If you plan to use auto-registration,
verify that it is enabled and properly
configured in Cisco CallManager
before connecting any Cisco IP Phone
to the network.
See the “Adding Phones to the
Cisco CallManager Database”
section on page 2-13.
Configure and assign
telephony features.
You must use Cisco CallManager
Administration to configure and assign
telephony features to the
Cisco IP Phones.
See the “Configuring Telephony
Features Using Cisco CallManager
Administration” section on
page 7-2.
Add and associate
users.
In Cisco CallManager Administration,
you can add users to the database and
associate them with specific phones. In
this way, users gain access to web
pages that allow them to configure
phone options such as call forwarding
and speed dialing.
See the “Adding Users to
Cisco CallManager” section on
page 7-6.