Filter
Top Products
Chapter 2 Preparing to Install the Cisco Wireless IP Phone 7920 on Your Wireless Network
Adding Phones to the Cisco CallManager Database
2-16
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Step 9 In the Phone Configuration window, enter information in the following fields:
• MAC Address
• Domain Name associated with this MAC Address
Step 10 Click Insert.
The Cisco CallManager Administration application asks if you want to assign a
directory number.
Step 11 Enter the required fields.
Note When you update the firmware image for the Cisco Wireless IP Phone 7920 in
Cisco CallManager versions prior to release 3.3(3) SR1, you must assign the
Cisco IP Phone 7960 phone type to the Cisco Wireless IP Phone 7920 when
adding the phone through the Cisco CallManager Administration application.
Related Topics
• Adding Phones with Auto-Registration, page 2-16
• Adding Phones with Auto-Registration and TAPS, page 2-18
• Adding Phones with Cisco CallManager Administration, page 2-18
• Adding Phones with BAT, page 2-19
Adding Phones with Auto-Registration
You can add phones with auto-registration without first gathering MAC addresses
from the phones.
When auto-registration is enabled, Cisco CallManager begins the automatic
startup process to obtain a directory number. During auto-registration,
Cisco CallManager automatically assigns the next available sequential directory
number to the phone.
When you use this method, Cisco CallManager automatically assigns directory
numbers to new phones as they register with Cisco CallManager.