Filter
Top Products
Chapter 6 Configuring the Wireless Network Settings on the Cisco Wireless IP Phone 7920
Entering or Verifying 802.11b Configuration Settings
6-14
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Switching the LEAP Prompt Mode On and Off
When the LEAP Prompt Mode is turned on, the phone displays a message
requesting that you enter the LEAP username and password whenever you power
on the Cisco Wireless IP Phone 7920.
Procedure
Step 1 Press the Menu softkey.
Step 2 Choose Network Config > 802.11b Configuration
Step 3 Scroll to LEAP and press Select.
The LEAP options display.
Step 4 Scroll to Prompt Mode and press Select.
Step 5 To turn off the prompt mode, scroll to Off.
To turn on the prompt mode, scroll to On.
Step 6 To confirm the change, press Select.
A check mark appears next to the selected option.
Step 7 Press Back to return to the LEAP options.
Related Topics
• Accessing the Wireless Network Configuration Settings on the Phone,
page 6-2
• Entering or Verifying Wireless Settings, page 6-4
• Performing a Site Survey Verification, page 6-15
• Requirements for an Optimal Wireless Voice Environment, page 6-18