Filter
Top Products
Chapter 6 Configuring the Wireless Network Settings on the Cisco Wireless IP Phone 7920
Performing a Site Survey Verification
6-16
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Related Topics
• Using the Cisco Wireless IP Phone 7920 Site Survey Utility, page 6-16
• Requirements for an Optimal Wireless Voice Environment, page 6-18
• Cisco Wireless IP Phone 7920 Design and Deployment Guide
Using the Cisco Wireless IP Phone 7920 Site Survey Utility
The Cisco Wireless IP Phone 7920 includes a site survey utility within the
Network Config menu that provides information about the access points currently
within in range of the phone. To use the site survey utility, follow these steps.
Procedure
Step 1 Configure the Cisco Wireless IP Phone 7920 with the same SSID and
encryption/authentication settings as the APs.
Step 2 Power on the phone so that it associates with the WLAN.
Step 3 Press the Menu softkey.
Step 4 Choose Network Config > Site Survey.
The phone displays a list of access points within range that have the same SSID
and security settings as the phone. See the following sample site survey list.
1(A),abcd...20,0
6(C),abcd...51,0*
11(A),abcd...10,0
Step 6
Perform a load test by having multiple Cisco Wireless IP Phones place calls,
especially in areas designated for high density use.
Step 7
Have users provide feedback when using their Cisco Wireless IP Phones.
Site Survey Verification