Filter
Top Products
CHAPTER
7-1
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
7
Configuring Features and Users
After you install Cisco IP Phones in your network, configure their network
settings, and add them to Cisco CallManager, you must use the
Cisco CallManager Administration application to configure telephony features,
and assign users.
This chapter provides an overview of these configuration and set up procedures.
Cisco CallManager documentation provides detailed instructions for these
procedures.
For suggestions about how to provide users with information about features, and
what information to provide, see Appendix A, “Providing Information to Users
Via a Website.”
For information about setting up phones in non-English environments, see
Appendix B, “Supporting International Users.”
This chapter includes the following topics:
• Configuring Telephony Features Using Cisco CallManager Administration,
page 7-2
• Creating Custom Phone Rings, page 7-4
• Adding Users to Cisco CallManager, page 7-6