Filter
Top Products
4-29
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Chapter 4 Using the Cisco 7920 Configuration Utility
How to Use the Cisco 7920 Configuration Utility
Reconfigure the network settings by using the Network Configuration menu on
the phone. See Chapter 5, “Configuring Network Settings on the Cisco Wireless
IP Phone 7920” and Chapter 6, “Configuring the Wireless Network Settings on
the Cisco Wireless IP Phone 7920.”
You can also use the Cisco 7920 Configuration Utility after enabling the USB port
to reconfigure the phone. See “Using the Settings Wizard” section on page 16.
Related Topics
• Current Phone Settings Window, page 4-8
• Using the Cisco 7920 Configuration Utility, page 4-15
• Using the Settings Wizard, page 4-16
• Using the Phone Preferences Window, page 4-18
• Configuration File Format, page 4-29
Configuration File Format
The settings that you configure for the phone are formatted into a file that is
ASCII-based and is not case sensitive. It does not contain entries with passwords,
login names, WEP keys, or any other critical data.
The format of a configuration file contains two parts and looks like this:
Setting Parameter = Setting Value
For example:
DHCPclient=Enable
IPaddress=10.0.0.1
SubnetMask=255.255.255.0
SSID=cascade