Filter
Top Products
Chapter 5 Configuring Network Settings on the Cisco Wireless IP Phone 7920
Verifying or Entering Network Settings
5-6
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Note The SRST Cisco CallManager always appears last in the list of servers, even if it
is active.
Related Topics
• Viewing the Current Configuration, page 5-6
• Modifying DHCP Settings, page 5-7
• Configuring Static Settings, page 5-9
• Configuring TFTP Options, page 5-13
Viewing the Current Configuration
To view the current network settings for a Cisco Wireless IP Phone 7920, use the
following steps.
Procedure
Step 1 Press the Menu softkey.
Step 2 Choose Network Config > Current Config.
Step 3 Press Select to view the list of network settings.
See Table 5-1 for descriptions and references for these settings.
Step 4 To return to the Network Config screen, press the Back softkey.
Related Topics
• Verifying or Entering Network Settings, page 5-4
• Modifying DHCP Settings, page 5-7
• Configuring Static Settings, page 5-9
• Configuring TFTP Options, page 5-13