Filter
Top Products
Chapter 4 Using the Cisco 7920 Configuration Utility
How to Use the Cisco 7920 Configuration Utility
4-30
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Available Settings for System Parameters
Table 4-4 lists the available settings for system parameters.
Available Settings for RF Network
Table 4-5 lists the available settings for an RF network.
Table 4-4 Available Settings for System Parameters
Setting Parameter Setting Value Comment
DHCPclient Enable | Disable Enable or disable DHCP client
IPaddress xxx.xxx.xxx.xxx IP address
SubnetMask xxx.xxx.xxx.xxx Subnet mask
PrimaryTFTPserver xxx.xxx.xxx.xxx Primary TFTP server address
PrimaryGateway xxx.xxx.xxx.xxx Primary gateway address
PrimaryDNSserver xxx.xxx.xxx.xxx Primary DNS server address
SecondaryDNSserver xxx.xxx.xxx.xxx Secondary DNS server address
Table 4-5 Available Settings for RF Network
Setting Parameter Setting Value Comment
SSID 1 Character string (maximum
length = 32)
SSID string
SSID 2 Character string (maximum
length = 32)
SSID string
SSID 3 Character string (maximum
length = 32)
SSID string
SSID 4 Character string (maximum
length = 32)
SSID string
TransmitPower 1 | 5 | 20 | 50 | 100 Transmit power level (mW)
DataRate 1 | 2 | 5.5 | 11 | Auto Data rate (Mbps)