Filter
Top Products
Chapter 8 Viewing Status, Statistics, and Firmware Information on the Cisco Wireless IP Phone 7920
Viewing the Hardware Information
8-4
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Procedure
Step 1 Press the Menu softkey.
Step 2 Choose Phone Settings > Phone Status.
Step 3 Select Firmware Info.
To view one of the following, scroll to the item and press Select:
• Firmware Version—Phone firmware version running in the phone
• BSP Load ID—Board support package running in the phone
• Boot Load ID—Version of boot loader in the phone.
Step 4 To exit the Firmware Info screens, press the Back softkey.
Related Topics
• Viewing the Hardware Information, page 8-4
• Viewing the Current Configuration, page 8-1
• Viewing Network Statistics, page 8-2
Viewing the Hardware Information
The Hardware Info screen in the Phone Status screen provides the hardware
release information.
To verify the hardware version, use the following steps.
Procedure
Step 1 Press the Menu softkey.
Step 2 Choose Phone Settings > Phone Status.