Filter
Top Products
Chapter 6 Configuring the Wireless Network Settings on the Cisco Wireless IP Phone 7920
Entering or Verifying Wireless Settings
6-8
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Procedure
Step 1 Press the Menu softkey.
Step 2 Choose Network Config > 802.11b Configuration > Wireless Settings
Step 3 Scroll to Encryption and press Select.
The WEP Key options display.
Step 4 Scroll to the WEP key that you want to activate, and press Select.
Step 5 Scroll to Activate and press OK to activate the key.
A check mark appears next to the activated key.
Step 6 Press Back to return to the Wireless Setting options.
Configuring a WEP Key
After you activate a WEP key you need to configure the password. You can choose
on of the following types of encryption schemes:
• 40-bit encryption—You must enter a 10-digit password that uses the
hexadecimal format of 0-9 and/or the characters A-F (for example,
ABCD123456).
• 128-bit encryption—You must enter a 26-digit password that uses the
hexadecimal format of 0-9 and/or the characters A-F (for example,
AB123456789CD01234567890EF).
• None—The WEP key function is disabled.
To configure the WEP passwords, use the following steps.
Procedure
Step 1 Press the Menu softkey.
Step 2 Choose Network Config > 802.11b Configuration > Wireless Settings
Step 3 Scroll to Encryption and press Select.
The WEP Key options display.
Step 4 Scroll to the WEP key that you activated, and press Select.